Complete male bayonet hose cuff for the container end of the tapered hose.

It's the complete bayonet fitting kit for machine end of the hose for the following machines, beginning with the Nilfisk GD1000 Series of vacuum cleaners, which comprised of the  and the and the and the  

It also suits the   and the and the   and the early and the new 

It was formerly SKU 22366100

To fit it, depress the two dimples on the click ring, and remove the click ring.

Thread the click ring, large diameter end first, down the hose.

Take the round hull in your dominant hand, then screw that anticlockwise onto the hose.

Bring up the click ring to the hull.

Put the hull into the cuff body, then push the click ring into the cuff body behind the hull, and push the dimples so they locate in the two holes on the cuff.

Check the hose and hull rotate freely in the cuff.

Then offer the hose and cuff with rubber seal into the container and twist it clockwise to lock it into the body.

FYI The cuff has to be removed from the container to remove the dustbag.